Solidigm D7-PS1030 PCIe 5.0 x4 NVMe Data Centre SSD
calcPageSize())"
/>
Secure payment
Credit card or bank transfer
Price and availability on request
Contact our teamNeed a lead time?
Contact our teamKey Features
Product Description
The Solidigm D7-PS1030 is a data centre SSD range using 176-layer TLC NAND, a PCIe 5.0 x4 interface and the NVMe 2.0 protocol. The range offers 1.6 TB, 3.2 TB, 6.4 TB and 12.8 TB capacities in both 2.5-inch U.2 and 7.5 mm E3.S form factors. Each capacity and form factor combination is listed in standard and TCG OPAL 2.02 variants, making OPAL support a variant-specific option rather than a feature of every drive.
The range supports NVMe-MI 1.2 and OCP v2.0r21. Its security functions include Secure Boot, firmware signing, Sanitize Erase and device attestation using DMTF SPDM 1.1.0. Management is available through NVMe-MI in-band and out-of-band interfaces, with SMBus and PCIe-VDM. The listed references are supplied in Generic Single Pack packaging.
The PS1030 is the Mid-Endurance member of this generation, rated for 3 drive writes per day over five years. This gives it a higher daily write allowance than the Standard Endurance PS1010 range. Published ratings for the selected U.2 and E3.S versions are shown below; actual throughput depends on the host and workload.
| Capacity | Sequential read/write maxima | Rated total writes |
|---|---|---|
| 1.6 TB | 14,500/4,100 MB/s | 8.7 PBW |
| 3.2 TB | 14,500/8,200 MB/s | 17.5 PBW |
| 6.4 TB | 14,500/10,000 MB/s | 35 PBW |
| 12.8 TB | 14,500/9,300 MB/s | 70 PBW |
Match the physical version to the server bay: U.2 drives have a 15 mm profile, while E3.S drives are 7.5 mm thick. Check the host's NVMe support and choose the exact TCG OPAL ordering code when that security option is required.